Updated Feb-2026 Pass 1z0-1196-25 Exam - Real Practice Test Questions [Q27-Q44]

Updated Feb-2026 Pass 1z0-1196-25 Exam - Real Practice Test Questions

Download Free Oracle 1z0-1196-25 Real Exam Questions

NEW QUESTION # 27
An issue is detected in a frozen bill segment prior to a bill being completed and sent out. If the frozen bill segment is then cancelled and rebilled, which two statements are correct after the bill has been completed?

• A. The bill will only include the newly created bill segment details for the customer to see and the cancelled bill segment details will be included in the following bill.
• B. The bill will include both the original bill segment that was cancelled and the new billsegment details for the customer to see.
• C. Both the originating and cancellation financial transactions are swept onto the same bill and the Show on Bill switches on the financial transactions will be deselected.
• D. The bill will only include the newly created bill segment details for the customer to see and the cancelled bill segment details will be suppressed from all subsequent bills.
• E. Both the originating and cancellation financial transactions are swept onto the same bill and the Show on Bill switches on the financial transactions will be selected.

Answer: C,D

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, when a frozen bill segment is cancelled and rebilled due to an issue, the system handles the financial transactions and bill presentation as follows:
Statement A: "Both the originating and cancellation financial transactions are swept onto the same bill and the Show on Bill switches on the financial transactions will be deselected." This is correct.
According to the Oracle Utilities Customer to Meter Billing Guide, when a bill segment is cancelled, both the original (originating) and cancellation financial transactions are included in the bill, but their
"Show on Bill" switches are deselected to prevent them from appearing as line items on the customer's bill, ensuring clarity.
Statement C: "The bill will only include the newly created bill segment details for the customer to see and the cancelled bill segment details will be suppressed from all subsequent bills." This is also correct.
The documentation specifies that after cancellation, only the new (rebilled) bill segment is visible to the customer, and the cancelled bill segment is suppressed to avoid confusion.
The other statements are incorrect:
Statement B: Including both the original and new bill segments for the customer to see would create confusion and is not standard practice in the system.
Statement D: The cancelled bill segment details are not included in the following bill; they are suppressed entirely after cancellation.
Statement E: The "Show on Bill" switches are deselected, not selected, to ensure the cancelled transactions do not appear on the bill.
Thus, the correct answers areAandC, as they accurately reflect the system's handling of cancelled and rebilled segments.
Reference:
Oracle Utilities Customer to Meter Billing Guide, Section: Bill Segment Cancellation and Rebilling Oracle Utilities Customer to Meter Implementation Guide, Chapter: Billing Processes

NEW QUESTION # 28
An implementation needs to set up a configuration that allows a service point to be used with various metered devices. This configuration should support interval, digital scalar, and analog scalar devices. How could this requirement be met?

• A. Configure one service point type, one device type, three device configuration types, and then define these as valid options on the service point type.
• B. Configure one service point type, three measuring component types, and then configure the three valid measuring component types on the service point type.
• C. Configure one service point type, three device configuration types, and thenconfigure the three valid device configuration types on the service point type.
• D. Configure one service point type, three device types, and then configure the three valid device types on the service point type.

Answer: C

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, aservice pointrepresents the location where utility services are delivered, and it must be configured to support variousmetered devices(e.g., interval, digital scalar, analog scalar). The Oracle Utilities Customer to Meter Configuration Guide explains that this requirement is met by configuringone service point type, three device configuration types, and then configuring the three valid device configuration types on the service point type.
TheService Point Typedefines the characteristics of service points, including which types of devices can be installed.Device Configuration Typesspecify the setup for devices, such as the number and type of measuring components (e.g., interval for smart meters, digital scalar for electronic meters, analog scalar for mechanical meters). By associating multiple Device Configuration Types with a Service Point Type, the system ensures that a service point can accommodate different device configurations over time, supporting the required flexibility.
For example, a Service Point Type for residential electric service might be linked to three Device Configuration Types: one for interval meters (smart meters with time-based readings), one for digital scalar meters (electronic meters with cumulative readings), and one for analog scalar meters (mechanical meters with cumulative readings). This configuration allows the service point to support any of these device types as needed, such as during meter upgrades or replacements.
The Oracle Utilities Customer to Meter Implementation Guide emphasizes that Device Configuration Types provide the granularity needed to support diverse metering technologies, while the Service Point Type ensures compatibility with the service delivery requirements.
The other options are incorrect:
Option A: Configure one service point type, three device types, and then configure the three valid device types on the service point type.This is incorrect, as Device Types define general device categories (e.g., electric meter) but lack the specific configuration details provided by Device Configuration Types.
Option C: Configure one service point type, three measuring component types, and then configure the three valid measuring component types on the service point type.This is incorrect, as Measuring Component Types definedata collection points (e.g., kWh, demand) but do not encompass the full device configuration.
Option D: Configure one service point type, one device type, three device configuration types, and then define these as valid options on the service point type.This is incorrect, as limiting to one Device Type reduces flexibility, and the correct approach focuses on Device Configuration Types.
Practical Example:A utility upgrading to smart meters configures a Service Point Type for electric service, linking it to three Device Configuration Types: interval (for smart meters), digital scalar (for existing electronic meters), and analog scalar (for older mechanical meters). When a smart meter is installed at a service point, the system references the interval Device Configuration Type, ensuring compatibility with the service point's requirements.
The Oracle Utilities Customer to Meter User Guide notes that this configuration supports seamless meter transitions, enabling utilities to manage diverse metering technologies without reconfiguring service points.
Reference:
Oracle Utilities Customer to Meter Configuration Guide, Section: Service Point Type and Device Configuration Oracle Utilities Customer to Meter Implementation Guide, Chapter: Device Management Oracle Utilities Customer to Meter User Guide, Section: Configuring Service Points

NEW QUESTION # 29
A severance process is a series of events (for example, letters, To Do entries, field activities, and so on) to strongly encourage a customer to make a payment for their outstanding debt. How many service agreements are linked to a severance process?

• A. All service agreements that are connected to the initiating overdue process
• B. Any number defined by the business user
• C. One
• D. None
• E. All service agreements that are connected to the initiating collection process

Answer: C

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, aseverance processis a collection mechanism designed to encourage payment for outstanding debts, typically involving actions like sending letters or initiating field activities. The Oracle Utilities Customer to Meter Implementation Guide specifies that a severance process is linked toone service agreement. This is because the severance process targets a specific service agreement with an outstanding balance, ensuring focused collection efforts.
The other options are incorrect:
Option A: The number of service agreements is not defined by the business user; it is system-defined as one per severance process.
Option B: The severance process is not linked to all service agreements in an overdue process; it targets a single service agreement.
Option C: A severance process is always linked to a service agreement, so "none" is incorrect.
Option D: Similarly, it does not include all service agreements in a collection process; it is specific to one.
Thus, the correct answer isE, as a severance process is associated with exactly one service agreement.
Reference:
Oracle Utilities Customer to Meter Implementation Guide, Chapter: Credit and Collections Oracle Utilities Customer to Meter Configuration Guide, Section: Severance Process Configuration

NEW QUESTION # 30
Meters are a type of device, which can be physical or virtual objects, that can produce data to be handled by the system. Which two statements are true regarding meters?

• A. One or more device configurations can be associated with a meter over time.
• B. A meter can only have scalar or interval measuring components associated with it.
• C. One or more measuring components can be associated with a meter's device configuration.
• D. Only one device configuration can be associated with a meter.
• E. Only one measuring component can be associated with a meter's device configuration.

Answer: A,C

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
Meters in Oracle Utilities Customer to Meter are devices that generate measurement data, and their configurations are critical for accurate data processing. The Oracle Utilities Customer to Meter documentation provides the following insights:
Statement A: "One or more measuring components can be associated with a meter's device configuration." This is true because a meter's device configuration can include multiple measuring components to capture different types of data (e.g., consumption, demand, or time-of-use readings).
Statement D: "One or more device configurations can be associated with a meter over time." This is also true, as a meter may have different configurations applied at different times, such as when a meter is reconfigured or upgraded.
The other statements are incorrect:
Statement B: "Only one measuring component can be associated with a meter's device configuration" is false because, as noted, multiple measuring components can be linked to a single device configuration.
Statement C: "Only one device configuration can be associated with a meter" is false because a meter can have multiple device configurations over its lifecycle.
Statement E: "A meter can only have scalar or interval measuring components associated with it" is false because meters can also support other types of measuring components, such as register or profile components, depending on the system configuration.
Thus, the correct answers areAandD, as they align with the system's flexibility in associating measuring components and device configurations with meters.
Reference:
Oracle Utilities Customer to Meter Configuration Guide, Section: Device Configuration and Measuring Components Oracle Utilities Customer to Meter Implementation Guide, Chapter: Meter Management

NEW QUESTION # 31
When a user initiates a request to start service, the system initiates a service agreement in the state of
"Pending Start". A pending start service agreement remains in this state until everything necessary to start service is defined in the system. At that time, the service agreement can be activated. What controls when the SA Activation background process activates a service agreement that is linked to a service point?

• A. The run date of the SA Activation background process
• B. The Start Date of a service agreement
• C. The End Date of the previous service agreement at a premise
• D. The algorithm configured in the SA Type - SA Activation plug-in spot for a service agreement's SA Type
• E. Completion of all field activity requests linked to the service point and service agreement

Answer: D

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, the activation of a service agreement from the "Pending Start" state is managed by theSA Activation background process. The Oracle Utilities Customer to Meter Configuration Guide specifies that the timing and conditions for activation are controlled by analgorithm configured in the SA Type - SA Activation plug-in spotfor the service agreement's Service Agreement Type (SA Type). This algorithm defines the logic for determining when all necessary conditions (e.g., meter installation, field activities) are met to activate the service agreement.
The other options are incorrect:
Option A: The Start Date is a reference point but does not control the activation process.
Option B: The End Date of a previous service agreement is unrelated to the activation of a new service agreement.
Option D: The run date of the background process determines when the process executes, but the activation logic is defined by the algorithm.
Option E: While field activity completion may be a condition, it is the algorithm that evaluates this, not the completion itself.
Thus, the correct answer isC, as the SA Activation algorithm governs the activation process.
Reference:
Oracle Utilities Customer to Meter Configuration Guide, Section: Service Agreement Activation Oracle Utilities Customer to Meter Implementation Guide, Chapter: Starting and Stopping Service

NEW QUESTION # 32
Where would an implementation configure the system to prevent duplicate persons from being added?

• A. Person Contact Type
• B. Person
• C. Person Type
• D. Installation Options
• E. Person Identifier Type

Answer: E

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, preventing the addition of duplicatepersonrecords is a critical function to maintain data integrity and avoid redundancy in customer information. The Oracle Utilities Customer to Meter Configuration Guide explicitly states that the system can be configured to prevent duplicate persons through thePerson Identifier Type. The Person Identifier Type defines the types of identifiers (e.g., Social Security Number, Tax ID, Driver's License) that can be associated with a person record and includes settings to enforce uniqueness for specific identifiers.
By configuring a Person Identifier Type to require uniqueness, the system checks whether an identifier (e.g., a specific SSN) already exists before allowing a new person record to be created. If a duplicate identifier is detected, the system prevents the creation of the new record and prompts the user to review the existing record. This functionality is essential for ensuring that each individual or business is represented by a single person record, reducing errors in billing, communication, and account management.
The Oracle Utilities Customer to Meter Implementation Guide further elaborates that the uniqueness check is implemented through validation rules defined in the Person Identifier Type, which can be customized to align with business requirements. For example, a utility might configure the SSN identifier type to be unique, ensuring that no two person records can share the same SSN.
The other options are incorrect for the following reasons:
Option A: Personrefers to the individual record itself, not a configuration point for preventing duplicates.
Option B: Person Contact Typedefines how contact information (e.g., phone, email) is stored but does not control duplicate prevention.
Option D: Installation Optionsmanage global system settings, such as default parameters, but do not specifically handle duplicate person checks.
Option E: Person Typecategorizes persons (e.g., residential, commercial) but does not include settings for duplicate prevention.
Practical Example:A utility configures the Person Identifier Type for "Social Security Number" to enforce uniqueness. When a customer service representative attempts to create a new person record with an SSN that already exists in the system, the system displays an error message, preventing the duplicate record and directing the representative to the existing person record. This ensures accurate customer data and avoids confusion in billing or service delivery.
The Oracle Utilities Customer to Meter User Guide highlights that configuring duplicate prevention via Person Identifier Type is a best practice for data quality, particularly in large utilities with millions of customers, where manual checks are impractical.
Reference:
Oracle Utilities Customer to Meter Configuration Guide, Section: Person Identifier Type Configuration Oracle Utilities Customer to Meter Implementation Guide, Chapter: Customer Information Management Oracle Utilities Customer to Meter User Guide, Section: Managing Person Records

NEW QUESTION # 33
A payment must be distributed to one or more service agreements for its financial impact to be realized. This is controlled by the logic in the payment distribution algorithm. Which entity is this algorithm plugged into?

• A. Tender Type
• B. Customer Class
• C. Payment Segment Type
• D. Installation Options
• E. Service Agreement (SA) Type

Answer: C

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, apaymentreceived from a customer must be distributed to one or more service agreements to update their balances and realize the financial impact. This distribution is governed by a payment distribution algorithm, which determines how the payment amount is allocated (e.g., to specific service agreements based on priority, balance, or other criteria). The Oracle Utilities Customer to Meter Billing Guide explicitly states that the payment distribution algorithm is plugged into thePayment Segment Type.
ThePayment Segment Typedefines the characteristics of payment segments, which are the individual allocations of a payment to specific service agreements. The payment distribution algorithm, configured in the Payment Segment Type, contains the logic for how payments are split or applied. For example, the algorithm might prioritize paying off older balances, allocate payments proportionally across all service agreements, or apply payments to a specific agreement based on customer instructions.
The Oracle Utilities Customer to Meter Configuration Guide further elaborates that the Payment Segment Type serves as a plug-in spot for algorithms that control payment distribution, ensuring flexibility for utilities to customize allocation rules. This is critical foraccurate financial tracking and customer satisfaction, as incorrect distribution could lead to disputes or misreported balances.
The other options are incorrect for the following reasons:
Option A: Service Agreement (SA) Typedefines the terms and conditions of a service agreement but does not control payment distribution logic.
Option B: Customer Classcategorizes customers for billing or service purposes but is not a plug-in spot for payment distribution algorithms.
Option D: Installation Optionscontain global system settings, such as default parameters, but do not directly manage payment distribution logic.
Option E: Tender Typespecifies the payment method (e.g., cash, check) and does not govern how payments are allocated to service agreements.
Practical Example:Suppose a customer with two service agreements (electricity with a $100 balance and water with a $50 balance) makes a $120 payment. The Payment Segment Type's distribution algorithm might be configured to allocate the payment proportionally, resulting in $80 applied to the electricity agreement and
$40 to the water agreement. This logic is defined in the Payment Segment Type, ensuring the payment reduces the correct balances.
The Oracle Utilities Customer to Meter Implementation Guide highlights that configuring the Payment Segment Type correctly is essential for automating payment processing, reducing manual interventions, and ensuring compliance with utility policies.
Reference:
Oracle Utilities Customer to Meter Billing Guide, Section: Payment Distribution and Payment Segments Oracle Utilities Customer to Meter Configuration Guide, Section: Payment Segment Type Configuration Oracle Utilities Customer to Meter Implementation Guide, Chapter: Payment Processing

NEW QUESTION # 34
Which two statements correctly describe important concepts about persons?

• A. A person exists for every individual or business.
• B. A person record is always linked to an account record.
• C. A person may have zero, one, or more forms of identification recorded.
• D. A person can only be linked to another person via an account record.
• E. A person's status indicates if they are a current customer.

Answer: A,C

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, thepersonentity represents an individual or business interacting with the utility. The Oracle Utilities Customer to Meter Implementation Guide clarifies:
Statement C: "A person exists for every individual or business." This is correct, as the system creates a person record for each entity (individual or business) that interacts with the utility, such as customers, vendors, or landlords.
Statement D: "A person may have zero, one, or more forms of identification recorded." This is also correct. The system allows for multiple forms ofidentification (e.g., Social Security Number, Tax ID) to be associated with a person, or none at all, depending on the configuration.
The other statements are incorrect:
Statement A: A person's status does not directly indicate if they are a current customer; instead, it reflects their relationship status (e.g., active, inactive) with the system, which may not be tied to customer status.
Statement B: A person record is not always linked to an account record; for example, a person could be a contact or landlord without an account.
Statement E: Persons can be linked to other persons through relationships (e.g., household members) without requiring an account record.
Thus, the correct answers areCandD, as they accurately describe the person entity in the system.
Reference:
Oracle Utilities Customer to Meter Implementation Guide, Chapter: Customer Information Management Oracle Utilities Customer to Meter Configuration Guide, Section: Person Configuration

NEW QUESTION # 35
A Rate Schedule contains the calculation rules that perform specific types of calculations. Which three options are controlled by a Rate Schedule's configuration?

• A. The method used to calculate each bill segment calculation line's value
• B. The contents of each bill segment calculation line
• C. The SA Types that are valid for the rate schedule
• D. Which Usage Calculation Group to initiate for usage calculations
• E. The General Ledger (GL) account impacted by each bill segment calculation line

Answer: A,C,E

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, aRate Scheduledefines the rules and calculations used to determine charges for services, forming the backbone of the billing process. The Oracle Utilities Customer to Meter Configuration Guide details the components controlled by a Rate Schedule's configuration:
Option A: The method used to calculate each bill segment calculation line's value.This is correct, as the Rate Schedule specifies the calculation methods (e.g., flat rate, tiered rate, time-of-use) for determining the monetary value of each bill segment calculation line based on usage or other factors.
Option B: The SA Types that are valid for the rate schedule.This is also correct, as the Rate Schedule defines which Service Agreement Types (SA Types) can use the rate, ensuring that only applicable services are billed under the schedule.
Option E: The General Ledger (GL) account impacted by each bill segment calculation line.This is correct, as the Rate Schedule configuration includes the GL accounts to which charges are posted, ensuring accurate financial reporting.
The Oracle Utilities Customer to Meter Billing Guide explains that Rate Schedules are highly configurable, allowing utilities to tailor billing calculations to diverse customer needs and regulatory requirements. For instance, a Rate Schedule for residential electricity might include tiered pricing, specify eligible SA Types (e.
g., residential electric service), and map charges to a revenue GL account.
The other options are incorrect:
Option C: The contents of each bill segment calculation line.While the Rate Schedule influences the calculation, the actual contents (e.g., description, quantity) are determined by the bill segment generation process, not directly by the Rate Schedule.
Option D: Which Usage Calculation Group to initiate for usage calculations.The Usage Calculation Group is defined by the usage subscription, not the Rate Schedule, which focuses on billing calculations rather than usage processing.
Practical Example:A Rate Schedule for a commercial water service might define a tiered rate structure (e.g.,
$2 per unit for 0-100 units, $3 per unit above 100 units), restrict its use to commercial SA Types, and post charges to a specific GL account (e.g., "Water Revenue"). When a customer uses 150 units, the Rate Schedule calculates the bill segment line values ($200 for the first 100 units + $150 for the next 50 units = $350) and directs the charge to the designated GL account.
The Oracle Utilities Customer to Meter Implementation Guide underscores that Rate Schedules are critical for aligning billing with business and regulatory requirements, providing flexibility to handle complex pricing models.
Reference:
Oracle Utilities Customer to Meter Configuration Guide, Section: Rate Schedule Configuration Oracle Utilities Customer to Meter Billing Guide, Section: Rate Calculations and GL Integration Oracle Utilities Customer to Meter Implementation Guide, Chapter: Rate Management

NEW QUESTION # 36
A bill can be completed when every bill segment on a bill is error-free. Which two statements are correct regarding a completed bill?

• A. Bill segments can only be canceled or rebilled if a completed bill has been reopened.
• B. The number of completed bills that may be reopened is configurable (provided specific conditions are satisfied for each bill).
• C. A Bill Route Type on a bill routing record can be changed if the completed bill's details have not been downloaded/extracted.
• D. A single bill routing record contains the list of all persons who are to receive a copy of the completed bill.
• E. Only the latest completed bill may be reopened (provided specific conditions are satisfied).

Answer: A,B

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, a bill is considered completed when all associated bill segments are error-free and the bill is finalized for distribution. The Oracle Utilities Customer to Meter Billing Guide provides the following insights:
Statement B: "The number of completed bills that may be reopened is configurable (provided specific conditions are satisfied for each bill)." This is correct. The system allows configuration of how many completed bills can be reopened, subject to specific conditions such as the bill not being extracted or downloaded for external processing. This flexibility is defined in the system's configuration settings.
Statement C: "Bill segments can only be canceled or rebilled if a completed bill has been reopened." This is also correct. According to the documentation, a completed bill must be reopened before any modifications, such as canceling or rebilling bill segments, can be performed. This ensures proper audit trails and financial integrity.
The other statements are incorrect:
Statement A: The Bill Route Type on a bill routing record cannot be changed after a bill is completed, even if the details have not been downloaded/extracted, as this would disrupt the finalized billing process.
Statement D: The system does not restrict reopening to only the latest completed bill; multiple bills can be reopened if conditions are met, as noted in Statement B.
Statement E: A bill routing record does not contain a list of all persons receiving a copy; instead, it defines how the bill is routed to specific recipients, and multiple records may exist for different recipients.
Thus, the correct answers areBandC, as they align with the system's billing processes.
Reference:
Oracle Utilities Customer to Meter Billing Guide, Section: Bill Completion and Reopening Oracle Utilities Customer to Meter Implementation Guide, Chapter: Billing Processes

NEW QUESTION # 37
A customer is regularly billed for consumption charges. What must exist before a customer's usage can be calculated for billing purposes?

• A. Usage Subscription
• B. Usage Calculation Request
• C. Usage Transaction
• D. Usage Request
• E. Usage Subscription Quantity

Answer: A

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, calculating a customer'susagefor billing purposes requires a framework to process meter readings or other measurement data into service quantities (bill determinants).
The Oracle Utilities Customer to Meter Billing Guide explicitly states that aUsage Subscriptionmust exist before a customer's usage can be calculated. The Usage Subscription is a record that links a service agreement to aUsage Calculation Group, which defines the rules for calculating usage based on measurement data.
The Usage Subscription serves as the bridge between the service agreement (which defines the billing terms) and the usage calculation process, ensuring that the system knows which calculations to apply and how to process the resulting quantities for billing. For example, a Usage Subscription for an electric service agreement might specify a Usage Calculation Group that calculates kWh consumption based on meter readings, which is then used to generate bill segments.
The Oracle Utilities Customer to Meter Configuration Guide further explains that the Usage Subscription is a prerequisite for initiating usage calculations, as it provides the context and configuration needed to process measurement data accurately. Without a Usage Subscription, the system cannot determine how to calculate usage or associate it with the correct service agreement for billing.
The other options are incorrect:
Option A: Usage Calculation Requestis not a standard term in the system; it may be confused with Usage Request.
Option B: Usage Requestinitiates a specific usage calculation but is created after the Usage Subscription is established.
Option C: Usage Subscription Quantityis not a defined entity; it may refer to the output of usage calculations but is not a prerequisite.
Option E: Usage Transactionis the result of the usage calculation process, not a prerequisite for it.
Practical Example:A residential customer has an electric service agreement. A Usage Subscription is created, linking the agreement to a Usage Calculation Group that processes scalar meter readings into kWh consumption. When a meter reading is received, a Usage Request triggers the calculation, but the Usage Subscription ensures the correct rules are applied, resulting in a Usage Transaction that feeds into the billing process.
The Oracle Utilities Customer to Meter User Guide emphasizes that Usage Subscriptions are foundational for automated billing, enabling utilities to process large volumes of usage data efficiently and accurately.
Reference:
Oracle Utilities Customer to Meter Billing Guide, Section: Usage Subscriptions and Billing Oracle Utilities Customer to Meter Configuration Guide, Section: Usage Subscription Configuration Oracle Utilities Customer to Meter User Guide, Section: Managing Usage for Billing

NEW QUESTION # 38
An implementation is starting an Advanced Meter Infrastructure (AMI) roll-out initiative and they plan to replace their legacy scalar TOU meters with smart meters. They wantto continue to bill for the same TOU periods and they do not want to change the rate being used. Which three actions should an implementation take to support this requirement?

• A. Add a TOU mapping usage calculation rule to the existing usage calculation group.
• B. Add a new usage calculation group with a TOU mapping usage calculation rule.
• C. Add the new usage calculation group to the Customer Rate Schedule extendable lookup for the rate.
• D. Set up the new or existing usage calculation group to be identified dynamically by plug-in logic configured on the usage subscription if not configured already.
• E. Add the TOU mapping usage rule to the Customer Rate Schedule extendable lookup for the rate.
• F. Set up the new usage calculation group to be identified dynamically by plug-in logic configured on the usage subscription's type if not configured already.

Answer: A,B,D

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, transitioning from legacy scalar Time-of-Use (TOU) meters to smart meters in an Advanced Meter Infrastructure (AMI) roll-out requires careful configuration to maintain existing TOU billing periods and rates. The Oracle Utilities Customer to Meter Configuration Guide outlines the steps to support this requirement, focusing on usage calculation groups and TOU mapping rules. The correct actions are:
Option A: Add a new usage calculation group with a TOU mapping usage calculation rule.This is correct, as a new usage calculation group may be needed to handle the data from smart meters, which often provide interval data rather than scalar readings. The TOU mapping usage calculation rule ensures that the smart meter data is mapped to the existing TOU periods (e.g., peak, off-peak) for billing consistency.
Option C: Set up the new or existing usage calculation group to be identified dynamically by plug- in logic configured on the usage subscription if not configured already.This is correct, as dynamic identification of the usage calculation group via plug-in logic on the usage subscription allows the system to select the appropriate group based on the meter type (e.g., smart meter vs. legacy). This ensures flexibility and compatibility with the new AMI infrastructure.
Option E: Add a TOU mapping usage calculation rule to the existing usage calculation group.This is also correct, as an alternative to creating a new group, the existing usage calculation group can be updated with a TOU mapping rule to process smart meter data while maintaining the same TOU periods, avoiding the need for extensive reconfiguration.
The Oracle Utilities Customer to Meter Implementation Guide explains that TOU mapping rules are critical for aligning meter data with billing periods, especially during AMI transitions. Smart meters typically provide granular interval data, which must be aggregated and mapped to TOU periods using these rules to match the legacy billing structure.
The other options are incorrect:
Option B: Add the TOU mapping usage rule to the Customer Rate Schedule extendable lookup for the rate.This is incorrect, as TOU mapping rules are part of usage calculation groups, not rate schedules, which focus on billing calculations.
Option D: Set up the new usage calculation group to be identified dynamically by plug-in logic configured on the usage subscription's type if not configured already.This is incorrect, as plug-in logic for dynamic group identification is typically configured on the usage subscription, not the subscription type.
Option F: Add the new usage calculation group to the Customer Rate Schedule extendable lookup for the rate.This is incorrect, as usage calculation groups are linked to usage subscriptions, not rate schedules.
Practical Example:A utility replacing scalar TOU meters with smart meters wants to maintain peak (7 AM-7 PM) and off-peak (7 PM-7 AM) billing periods. They create a new usage calculation group with a TOU mapping rule to aggregate smart meter interval data into these periods (Option A). Alternatively, they update the existing group with a TOU mapping rule (Option E). Plug-in logic on the usage subscription dynamically selects the appropriate group based on whether the meter is smart or legacy (Option C). This ensures billing continuity without changing the rate.
The Oracle Utilities Customer to Meter User Guide highlights that these configurations enable seamless AMI transitions, allowing utilities to leverage smart meter capabilities while preserving existing billing structures.
Reference:
Oracle Utilities Customer to Meter Configuration Guide, Section: Usage Calculation Groups and TOU Mapping Oracle Utilities Customer to Meter Implementation Guide, Chapter: AMI Implementation and Rate Configuration Oracle Utilities Customer to Meter User Guide, Section: Managing Usage Calculations

NEW QUESTION # 39
When a request for usage is initiated for billing calculations, the system subsequently uses available meter reading data to calculate service quantities (often referred to as bill determinants). If these reads are later corrected (or replacement reads added), a Corrected Read Notification is instantiated. Which entity represents a Corrected Read Notification?

• A. Off Cycle Bill Generator
• B. Usage Transaction
• C. Usage Request
• D. Measurement
• E. Correction Note

Answer: D

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, the process of calculating service quantities (bill determinants) for billing relies on meter reading data processed through usage calculations. When meter reads are corrected or replaced (e.g., due to errors or manual adjustments), the system generates aCorrected Read Notificationto ensure that the updated data is reflected in subsequent processes, such as billing or usage calculations.
According to the Oracle Utilities Customer to Meter Configuration Guide, the entity that represents a Corrected Read Notification is aMeasurement.
TheMeasuremententity in the system captures the actual meter reading data, including initial, corrected, or replacement reads. When a read is corrected, the Measurement record is updated, and this update serves as the Corrected Read Notification, triggering downstream processes like recalculating usage or adjusting bill segments. For example, if a meter reading was initially recorded as 100 kWh but later corrected to 120 kWh, the Measurement record is updated to reflect the corrected value, and this update notifies the system to reprocess the associated usage transaction for accurate billing.
The Oracle Utilities Customer to Meter Implementation Guide further explains that Measurements are central to the Validation, Editing, and Estimation (VEE) process, as they store both raw and validated data. A Corrected Read Notification, as a Measurement, ensures that all dependent processes, such as usage subscriptions orbill calculations, use the most accurate data. This is critical for maintaining billing integrity and customer trust.
The other options are incorrect for the following reasons:
Option A: Correction Noteis not a defined entity in Oracle Utilities Customer to Meter for this purpose; it may be confused with documentation or audit notes but does not represent a Corrected Read Notification.
Option B: Off Cycle Bill Generatoris used to create bills outside regular billing cycles and is unrelated to meter read corrections.
Option D: Usage Transactionrepresents the result of usage calculations (e.g., service quantities) but does not capture the corrected read itself; it relies on the Measurement for input data.
Option E: Usage Requestinitiates the calculation of usage but does not represent the notification of a corrected read.
Practical Example:Suppose a customer's meter reading for a billing period is initially incorrect due to a data entry error. The utility corrects the reading in the system, updating the Measurement record. This update acts as the Corrected Read Notification, prompting the system to recalculate the usage transaction and generate a corrected bill segment, ensuring the customer is billed accurately.
Reference:
Oracle Utilities Customer to Meter Configuration Guide, Section: Measurement Management and VEE Processing Oracle Utilities Customer to Meter Implementation Guide, Chapter: Meter Data Management and Corrections

NEW QUESTION # 40
Where does an implementation define whether at least one form of identification is required to be captured on a person record for a customer?

• A. Person Identifier Type
• B. Master Configuration
• C. Person Type
• D. Installation Options
• E. Feature Configuration

Answer: C

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, the requirement for capturing at least one form of identification on a personrecord is defined in thePerson Typeconfiguration. The Oracle Utilities Customer to Meter Configuration Guide specifies that the Person Type determines the characteristics and rules for person records, including whether one or more identifiers (e.g., SSN, Tax ID) are mandatory. By setting a mandatory identifier rule in the Person Type, the system ensures that a person record cannot be created or saved without at least one valid identifier, enhancing data completeness and compliance with regulatory or business requirements.
The Person Type configuration allows utilities to tailor identification requirements based on the type of person (e.g., residential customer, commercial entity, landlord). For example, a residential Person Type might require an SSN or Driver's License, while a commercial Person Type might mandate a Tax ID. This flexibility ensures that the system aligns with the utility's policies for customer identification and verification.
The Oracle Utilities Customer to Meter Implementation Guide further explains that the mandatory identifier setting in Person Type is enforced through validation logic, which checks for the presence of at least one identifier during record creation or update. Thisis particularly important for preventing incomplete records and ensuring that customer interactions (e.g., billing, collections) are linked to verified identities.
The other options are incorrect for the following reasons:
Option A: Feature Configurationcontrols specific system behaviors or modules but does not manage person identifier requirements.
Option B: Master Configurationdefines high-level system settings but is not specific to person record rules.
Option C: Person Identifier Typedefines the types of identifiers and their properties (e.g., uniqueness) but does not mandate their inclusion.
Option D: Installation Optionshandle global system parameters, not specific person record requirements.
Practical Example:A utility configures the Person Type for "Residential Customer" to require at least one identifier, such as an SSN or Driver's License. When a customer service representative creates a new person record for a residential customer, the system prompts for an identifier and prevents saving the record until one is provided. This ensures that all customer records meet the utility's identification standards, facilitating accurate account management and regulatory compliance.
The Oracle Utilities Customer to Meter User Guide emphasizes that mandatory identifier rules in Person Type are critical for maintaining data integrity, especially in scenarios involving customer verification or fraud prevention.
Reference:
Oracle Utilities Customer to Meter Configuration Guide, Section: Person Type Configuration Oracle Utilities Customer to Meter Implementation Guide, Chapter: Customer Data Management Oracle Utilities Customer to Meter User Guide, Section: Person Record Creation

NEW QUESTION # 41
When a payment is made by a customer, it can impact their account's overall current balance. Which payment- related entity are financial transactions created directly against?

• A. Payment Event
• B. Payment Segment
• C. Payment Tender
• D. Payment
• E. Payment Advice

Answer: B

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, payments are processed through a hierarchy of entities, andfinancial transactionsare created to reflect the financial impact of payments. The Oracle Utilities Customer to Meter Billing Guide clarifies that financial transactions are created directly against thePayment Segment. A payment segment represents the allocation of a payment to a specific service agreement or obligation, and it is at this level that financial transactions are recorded to update the account's balance.
The other options are incorrect:
Option A: Payment Advice is used for third-party payment instructions, not for direct financial transactions.
Option B: A Payment is a higher-level entity that groups payment segments, but financial transactions are not created directly against it.
Option C: A Payment Event groups multiple payments, but financial transactions are tied to payment segments.
Option E: A Payment Tender represents the method of payment (e.g., cash, check), not the entity for financial transactions.
Thus, the correct answer isD, as financial transactions are created against payment segments.
Reference:
Oracle Utilities Customer to Meter Billing Guide, Section: Payment Processing and Financial Transactions Oracle Utilities Customer to Meter Implementation Guide, Chapter: Payment Management

NEW QUESTION # 42
There are various searching capabilities that a business user can use to locate customer and device-related information. What can be used to find devices, measuring components, service points, or usage subscriptions using a variety of search criteria?

• A. Control Central Search
• B. Unified Search
• C. 360 Search
• D. Customer 360 Search

Answer: A

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter, theControl Central Searchis the primary tool used by business users to locate devices, measuring components, service points, or usage subscriptions using a variety of search criteria. The Oracle Utilities Customer to Meter User Guide describes Control Central as a centralized dashboard that provides comprehensive search capabilities, allowing users to find customer and device-related information by entering criteria such as account numbers, device IDs, service point addresses, or usage subscription details.
Control Central Search is designed to streamline access to critical data, presenting results in a unified view that includes customer accounts, associated service points, devices, and usage subscriptions. For example, a user can search for a specific meter by its serial number and view its associated service point, measuring components, and billing history within the Control Central interface.
The other options are incorrect for the following reasons:
Option A: Unified Searchis not a specific feature in Oracle Utilities Customer to Meter; it may be confused with general search functionalities in other systems.
Option B: Customer 360 Searchis not a defined term in the system, though it resembles the concept of a 360-degree customer view provided by Control Central.
Option D: 360 Searchis also not a recognized feature; it may be a misnomer for Control Central's comprehensive search capabilities.
The Oracle Utilities Customer to Meter Implementation Guide emphasizes that Control Central Search is a key feature for customer service representatives, enabling them to quickly resolve inquiries by accessing all relevant data in one place. For instance, if a customer calls about a billing issue, the representative can use Control Central Search to locate the customer's account, review the associated service point, and check the meter's measurement data.
Reference:
Oracle Utilities Customer to Meter User Guide, Section: Control Central Search Oracle Utilities Customer to Meter Implementation Guide, Chapter: Searching and Viewing Data

NEW QUESTION # 43
Specifications are used to define the manufacturer, model, and other information about assets. Which statement is true about specifications?

• A. Specifications include the inspection history of assets.
• B. A single specification can only be used on one asset.
• C. Specifications apply only to assets and not to components.
• D. Specifications can include peer specifications.

Answer: D

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
In Oracle Utilities Customer to Meter,specificationsare records that define detailed attributes of assets, such as manufacturer, model, serial number, and technical specifications. The Oracle Utilities Customer to Meter Configuration Guide confirms thatspecifications can include peer specifications, making Statement A correct.Peerspecificationsrefer to related specifications that provide additional context or compatibility information, such as specifying compatible components or alternative models for an asset. This feature allows utilities to manage complex asset relationships, ensuring that assets and their components are correctly configured and maintained.
For example, a specification for a smart meter might include peer specifications for compatible communication modules or registers, enabling the system to validate that installed components meet the asset' s requirements. This enhances asset management by providing a structured way to define and track relationships between assets and their associated components.
The Oracle Utilities Customer to Meter Implementation Guide further explains that specifications are critical for asset lifecycle management, as they provide a standardized way to document and reference asset details across maintenance, installation, and replacement processes.
The other statements are incorrect:
Statement B: Specifications apply only to assets and not to components.This is incorrect, as specifications can be defined for both assets (e.g., meters) and components (e.g., registers, communication modules).
Statement C: A single specification can only be used on one asset.This is incorrect, as a single specification can be applied to multiple assets of the same type (e.g., all meters of a specific model).
Statement D: Specifications include the inspection history of assets.This is incorrect, as inspection history is tracked separately in maintenance or activity records, not within specifications.
Practical Example:A utility defines a specification for a particular model of electric meter, including its manufacturer, model number, and voltage rating. The specification also includes peer specifications for compatible current transformers and communication modules. When a meter is installed, the system checks the peer specifications to ensure that the installed components are compatible, streamlining maintenance and upgrades.
The Oracle Utilities Customer to Meter User Guide highlights that specifications, including peer specifications, are essential for managing asset diversity, particularly in utilities with large inventories of meters and components.
Reference:
Oracle Utilities Customer to Meter Configuration Guide, Section: Asset Specifications and Peer Specifications Oracle Utilities Customer to Meter Implementation Guide, Chapter: Asset Management Oracle Utilities Customer to Meter User Guide, Section: Managing Asset Specifications

NEW QUESTION # 44
......

1z0-1196-25 Dumps 100 Pass Guarantee With Latest Demo: https://passleader.dumpexams.com/1z0-1196-25-vce-torrent.html