[2022] JN0-663 PDF Questions - Perfect Prospect To Go With Dumpexams Practice Exam
Juniper JN0-663 Pdf Questions - Outstanding Practice To your Exam
How to book the Service Provider Routing and Switching, Professional JN0-663 Exam
These are the following steps for registering for the Juniper JN0-663 exam test. Step 1: Visit Pearson VUE Exam Registration Step 2: Signup/Login to Pearson VUE account Step 3: Search for Juniper JN0-663 Exam Step 4: Select Date, time and confirm with a payment method
NEW QUESTION 12 
Referring to the exhibit, the local BGP router is receiving IPv4 routes from the BGP neighbor, but it is not receiving L3 VPN routes from the BGP neighbor.
Which two actions should you take to solve this problem? (Choose two.)
- A. Configure the family inet-vpn unicaststatement on the BGP neighbor.
- B. Configure the family inet unicaststatement on the local BGP router.
- C. Configure the family inet-vpn unicaststatement on the local BGP router.
- D. Configure the family inet unicaststatement on the BGP neighbor.
Answer: A,C
NEW QUESTION 13
Which two statements regarding Ethernet segments (ES) are correct? (Choose two.)
- A. The Type-3 EVPN route will be used for the aliasing function to load-balance to the ES.
- B. The Type-2 EVPN route will indicate if there is a designated forwarder on the ES.
- C. The Type-4 EVPN route will be used to elect the designated forwarder for the ES.
- D. The Type-1 EVPN route will indicate if the ES is all-active or single-active.
Answer: C,D
NEW QUESTION 14
Exhibit:
CE-1, CE-2, and CE-3 are part of a single VPLS VPN An Ethernet frame has just arrived at PE-3 from CE-3.
It has a source MAC address of CE-3 and a destination MAC address of CE-1. You want to know what PE-3 does with the Ethernet frame.
Referring to the exhibit, which statement is correct?
- A. It drops the packet because the destination MAC address is not for PE-3.
- B. It forwards the packet to PE-1 only.
- C. It drops the packet because the destination MAC address is not in PE-3's MAC table.
- D. It forwards the packet to PE-1 and PE-2.
Answer: D
NEW QUESTION 15
Exhibit:
You have a Layer 3 VPN established between PE-1 and PE-2 as well as between PE-1 and PE-3. You are using a route reflector (RR-1) to distribute VPN routes to your IBGP peers. You are asked to ensure that only relevant routes are sent from RR-1 to each of the PE routers.
Referring to the exhibit, which statement is correct?
- A. You should use route target filtering on RR-1 and all the PE devices to control which routes are sent to each PE router.
- B. You should use firewall filtering on RR-1 and all the PE devices to control which routes are sent to each PE router.
- C. You should use route target filtering only on RR-1 to control which routes are sent to each PE router.
- D. You should use VRF export policies on RR-1 to control which routes are sent to each PE router.
Answer: C
NEW QUESTION 16
Exhibit:
Referring to the exhibit, you want to make ISP1 your preferred connection for inbound and outbound traffic.
Which two steps will accomplish this task? (Choose two.)
- A. Create an export policy to prepend the ASN on advertised routes and apply it to the EBGP peer on R1.
- B. Create an export policy setting local-preference 200 and next-hop self and apply it to the IBGP peers on R1.
- C. Create an export policy setting local-preference 200 and next-hop self and apply it to the IBGP peers on R2.
- D. Create an export policy to prepend the ASN on advertised routes and apply it to the EBGP peer on R2.
Answer: B,D
NEW QUESTION 17
Exhibit:
Your network connects two segments of your customer's network as shown in the exhibit They need to exchange routes between Segment 1 and Segment 2 but both segments use the same AS number.
Which two steps will accomplish this task? (Choose two.)
- A. Configure the BGP group with the advertise-peer-as parameter on routers R2 and R3.
- B. Configure the routing-options autonomous-system loops l parameter on routers R2 and R3.
- C. Configure the BGP group with the as-override parameter on routers R1 and R4.
- D. Configure the routing-options autonomous-system loops l parameter on routers R1 and R4.
Answer: A,D
NEW QUESTION 18 
Refer
ring to the exhibit, which two statements are correct for a route advertised by R1 towards R4? (Choose two.)
- A. The AS path is set to 150 by R2.
- B. The AS path is set to null by R2.
- C. The BGP next hop is set to 14.1.1.1 by R2.
- D. The BGP next hop is set to 192.168.2.2 by R2.
Answer: B,C
NEW QUESTION 19
Exhibit:
You have an established Layer 3 VPN between two PE devices. You are asked to only send certain routes from PE-1 over the VPN to the remote site while maintaining all the routes on the PE-1 device. You created a policy that matches the specific routes and then tags these routes with the appropriate target community values.
In this scenario, which configuration changes must be made to satisfy the requirement?
- A. Configure a RIB group and apply the policy as an import policy to routes distributed into the bgp I3vpn.0 routing table
- B. Configure the export parameter and apply the policy to the my-ext-group BGP group configuration.
- C. Configure the import parameter and apply the policy to the my-ext-group BGP group configuration.
- D. Configure the vrf-export parameter and apply the policy under the edit routing-instances vpn-a hierarchy.
Answer: D
NEW QUESTION 20
Exhibit:
All adjacencies have been formed, no extra options have been configured, and no policies have been written.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. R1 will create its own default route that points to R2
- B. R2 will create a default route and send it as a TLV to R1
- C. R1 can reach R5.
- D. R1 cannot reach R5
Answer: B,C
NEW QUESTION 21
Exhibit:
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The CE-1 and CE-2 routes will have the same route distinguisher, which will not stop the BGP routes from being shared.
- B. The CE-1 and CE-2 routes will have the same route distinguisher, which will stop the BGP routes from being shared.
- C. An AS loop will exist between CE-1 and CE-2 and the BGP routes will not be shared.
- D. An AS loop will not exist between CE-1 and CE-2 and the BGP routes will be shared.
Answer: A,C
NEW QUESTION 22
Exhibit:
Which two statements regarding the output shown in the exhibit are correct? (Choose two.)
- A. The type of connection is local.
- B. The PEs have matching control word values.
- C. The type of connection is remote.
- D. The label associated with this virtual circuit is out of range.
Answer: B,C
NEW QUESTION 23
Exhibit:
You are receiving the same 200.0.0.0/24 BGP route from four different ISPs.
Referring to the exhibit, which ISP's route would be selected as active?
- A. ISP-C
- B. ISP-A
- C. ISP-B
- D. ISP-D
Answer: D
NEW QUESTION 24 
Referring to the exhibit, which OSPFv3 configuration is implemented on router R1?
set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0
- A. set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0
set protocols ospf3 area 0.0.0.1 virtual-link neighbor-id 172.16.1.2
set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0 - B. set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0
set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0 interface-type p2p - C. set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0
set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0
set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0 - D. set protocols ospf3 area 0.0.0.1 interface ge-0/0/1.0
set protocols ospf3 area 0.0.0.1 interface ge-0/0/0.0 secondary
set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0
Answer: B
NEW QUESTION 25
You are considering different MPLS VPN connectivity options for a new customer deployment. Your customer requires shared LSPs, Layer 2 connectivity, and auto-provisioning.
Which type of VPN satisfies the requirements?
- A. BGP Layer 2 VPNs
- B. BGP Layer 3 VPNs
- C. LDP Layer 2 circuits
- D. circuit cross-connects
Answer: A
NEW QUESTION 26 
A network designer wants to ensure that traffic from R2 destined for 2001:db9:ffff:ff00::/62 always traverses the R2-R1 link if that link is available.
Referring to the exhibit, which configuration change will satisfy this requirement?
- A.
- B.
- C.
Answer: C
NEW QUESTION 27
Which two statements are true about what a route reflector does by default when distributing routes it has received from reflector clients? (Choose two.)
- A. It adds its cluster ID to the client-received routes.
- B. It does not change any received BGP attributes.
- C. It changes the default BGP attributes to inform peers that it is a route reflector.
- D. It sets the next hop of all routes to "self' to prevent routing loops.
Answer: A,B
NEW QUESTION 28
......
Online Questions - Outstanding Practice To your JN0-663 Exam: https://passleader.dumpexams.com/JN0-663-vce-torrent.html