300-620 Practice Exam Tests Latest Updated on Jun-2022
Pass 300-620 Exam in First Attempt Guaranteed Dumps!
The 300-620 exam evaluates the candidates’ understanding of Cisco switches running in the ACI mode and includes the topics, such as ACI fabric, ACI management ACI anywhere, etc. Thus, you should be fluent in configuring, implementing, and managing Cisco switches in the ACI mode to get through this test. All in all, the exam syllabus consists of 6 knowledge areas specified by the vendor. All of these domains will contribute a certain percentage to the overall number of questions, which represent the following:
- ACI Management (20%): This is one of the biggest modules of the exam that covers the implementation of configuration backup, in-band and out-of-band, as well as RBAC and AAA. You need to know how to configure an upgrade and use snmp services and syslog.
- Integrations (15%): To be able to answer the questions from this area, a potential candidate has to learn about the implementation of the VMware vCenter DVS integration and service graph (unmanaged and managed). Your understanding of resolution immediacy in VMM is what should be part of your knowledge base as well;
- External Network Connectivity (20%): This part will evaluate the individuals’ skills in implementing Layer 3 and Layer 2 (STP/MCP basics);
How to Prepare for Implementing Cisco Application Centric Infrastructure (300-620 DCACI)
Preparation Guide for Implementing Cisco Application Centric Infrastructure (300-620 DCACI)
Introduction for Implementing Cisco Application Centric Infrastructure (300-620 DCACI)
The Implementing Cisco Application Centric Infrastructure v1.0 (DCACI 300-620) exam is a 90-minute exam that is associated with the CCNP Data Center Certification and Cisco Certified Specialist - Data Center ACI Implementation certifications. This exam tests a candidate's knowledge of Cisco switches in ACI mode including configuration, implementation, and management. You will learn the essential skills, concepts, and technologies to be a contributing member of a cybersecurity operations center (SOC) including understanding the IT infrastructure, operations, and vulnerabilities.
Cisco ACI delivers an intent-based networking framework to enable agility in the data center. It captures higher-level business and user intent in the form of a policy and translates this intent into the network constructs necessary to dynamically provision the network, security, and infrastructure services. It uses a holistic systems-based approach, with tight integration between hardware and software and physical and virtual elements, an open ecosystem model, and innovative Cisco customer Application-Specific Integrated Circuits (ASICs) to enable unique business value for modern data centers. This unique approach uses a common policy-based operating model across the network, drastically reducing the cost and complexity of operating your network.
Before taking this exam, you should have the following knowledge and skills:
- ACI Packet Forwarding
- ACI Fabric Infrastructure
- ACI Management
- Integrations
- External Network Connectivity
The following candidates can enroll for this exam:
- Network Managers
- Data Center Engineers
- Server Administrators
- Cisco Integrators/Partners
- Systems Engineers
- Network Designers
- Consulting Systems Engineers
- Network Engineers
- Cisco integrators and partners
- Technical Solutions Architects
- Network Administrators
NEW QUESTION 63
An engineer must limit management access to me Cisco ACI fabric that originates from a single subnet where the NOC operates. Access should be limited to SSH and HTTPS only. Where should the policy be configured on the Cisco APIC to meet the requirements?
- A. ACL on the console interface
- B. policy In the management tenant
- C. ACL on the management interface of the APIC
- D. policy on the management VLAN
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_0111.html
NEW QUESTION 64
Which statement regarding ACI Multi-Pod and TEP pool is true?
- A. The Pod1 TEP pool must be split and a portion of the TEP pool allocated to each Pod.
- B. The IP addresses used in the IPN network can overlap TEP pool of the APIC.
- C. A different TEP pool must be assigned to each Pod.
- D. The same TEP pool is used in all Pods.
Answer: C
Explanation:
Section: ACI Anywhere
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739714.html
NEW QUESTION 65
Which type of policy configures the suppression of faults that are generated from a port being down?
- A. event lifecycle assignment
- B. event severity assignment
- C. fault severity assignment
- D. fault lifecycle assignment
Answer: C
NEW QUESTION 66
A Cisco ACI bridge domain and VRF are configured with a default data-plane learning configuration. Which two endpoint attributes are programmed in the leaf switch when receiving traffic? (Choose two.)
- A. Local MAC, IP
- B. Local Subnet
- C. Remote MAC. IP
- D. Local IP, not MAC
- E. Remote Subnet
- F. Remote IP
Answer: A,F
NEW QUESTION 67
An engineer must configure RADIUS authentication with Cisco ACI for remote authentication with out-of-band management access. Drag and drop the RADIUS configuration steps from the left into the required implementation order on the right. Not all steps are used.
Answer:
Explanation:
NEW QUESTION 68
An engineer is implementing a Cisco ACI environment that consists of more than 20 servers. Two of the servers support only Cisco Discovery Protocol with no order link discovery protocol. The engineer wants the servers to be discovered automatically by the Cisco ACI fabric when connected. Which action must be taken to meet this requirement?
- A. Configure a lower order policy group that enables Cisco Discovery Protocol for the interface on the desired leaf switch.
- B. Configure a higher order interface policy that enables Cisco Discovery Protocol for the interface on the desired leaf switch.
- C. Create an interface profile for the interface that disables LLDP on the desired switch that is referenced by the interface policy group.
- D. Create an override policy that enables Cisco Discovery Protocol after LLDP is enabled in the default policy group.
Answer: D
NEW QUESTION 69 
Refer to the exhibit. An engineer is implementing Cisco ACI - VMware vCenter integration for a blade server that lacks support of bonding. Which port channel mode results in "route based on originating virtual port" on the VMware VDS?
- A. LACP Active
- B. LACP Passive
- C. MAC Pinning-Physical-NIC-load
- D. Static Channel - Mode On
- E. MAC Pinning+
Answer: E
Explanation:
Section: Integrations
NEW QUESTION 70
An engineer is implementing Cisco ACI at a large platform-as-a-service provider using APIC controllers, 9396PX leaf switches, and 9336PQ spine switches. The leaf switch ports are configured as IEEE 802.1p ports. Where does the traffic exit from the EPG in IEEE 802.1p mode in this configuration?
- A. from leaf ports tagged as VLAN 0
- B. from leaf ports untagged
- C. from leaf ports tagged as VLAN 1
- D. from leaf ports tagged as VLAN 4094
Answer: A
NEW QUESTION 71
Which two statements regarding ACI Multi-Site are true? (Choose two.)
- A. ACI Multi-Site is a solution that supports a dedicated APIC cluster per site.
- B. The Multi-Site orchestrator must be directly attached to one ACI leaf.
- C. The Inter-Site network routers should run OSPF to establish peering with the spines.
- D. ACI Multi-Site is a solution that allows one APIC cluster to manage multiple ACI sites.
- E. Routers in the Inter-Site network must run OSPF, DHCP relay, and MP-BGP.
Answer: C,D
NEW QUESTION 72
Drag and drop the Cisco ACI Layer 4 to Layer 7 service insertion terms on the left to the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 73
Refer to the exhibit.
A Cisco ACI fabric is newly deployed, and the security team requires more visibility of all inter-EPG traffic flows. All traffic in a VRF must be forwarded to an existing firewall pair. During fallover, the standby firewall must continue to use the same IP and MAC as the primary firewall. Drag and drop the steps from the left Into the Implementation order on the right to configure the service graph that meets the requirements. (Not all steps are used.)
Answer:
Explanation:
NEW QUESTION 74
The unicast routing feature is enabled on the bridge domain. Which two conditions enable the Cisco ACI leaf to learn a source IP as a local endpoint? (Choose two.)
- A. IP traffic routed through a Layer 3 Out.
- B. Through ARP received on an SVI.
- C. Through VXLAN traffic received on the uplink.
- D. IP traffic routed through an SVI.
- E. Through Ethernet traffic received in a bridge domain.
Answer: B,D
Explanation:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739989.html
NEW QUESTION 75
Which two components are essential parts of a Cisco ACI Virtual Machine Manager (VMM) domain policy configuration? (Choose two.)
- A. IP address pool association
- B. Layer 3 outside interface association
- C. EPG static port binding
- D. EPG association
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamentals/b_ACI-Fundamentals_chapter_01011.html#concept_74EFC437C0AA44A391676F70ACE59DF3
- E. VMM domain profile
Answer: D,E
NEW QUESTION 76
Which new construct must a user create when configuring in-band management?
- A. bridge domain
- B. management contract
- C. management tenant
- D. VLAN pool
Answer: C
NEW QUESTION 77
Drag and drop the Cisco ACI Layer 4 to Layer 7 service insertion terms on the left to the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 78 
Refer to the exhibit. Which Adjacency Type value should be set when the client endpoint and the service node interface are in a different subnet?
- A. Routed
- B. Unicast
- C. L3Out
- D. L3
Answer: D
Explanation:
Section: External Network Connectivity
NEW QUESTION 79
A network engineer demonstrates Cisco ACI to a customer. One of the test cases is to validate a disaster recovery event by resetting the ACI fabric to factory and then restoring the fabric to the state it was in before the event. Which setting must be enabled on ACI to export all configuration parameters that are necessary to meet these requirements?
- A. enabled AES encryption
- B. generated a tech-support file
- C. encrypted export destination
- D. enabled JSON format export
Answer: A
NEW QUESTION 80
An engineer must allow multiple external networks to communicate with internal ACI subnets. Which action should the engineer take to assign the prefix to the class ID of the external Endpoint Group?
- A. Configure subnets with the Import Route Control Subnet flag enabled.
- B. Enable the Export Route Control Subnet for the External Endpoint Group flag.
- C. Configure subnets with the External Subnets for External EPG flag enabled.
- D. Enable an L30ut with Shared Route Control Subnet.
Answer: C
NEW QUESTION 81
In the context of ACI Multi-Site, when is the information of an endpoint (MAC/IP) that belongs to site 1 advertised to site 2 using the EVPN control plane?
- A. Endpoint information is exchanged across sites when the endpoints are discovered in both sites.
- B. Endpoint information is not exchanged across sites unless a policy is configured to allow communication across sites.
- C. Endpoint information is exchanged across sites as soon as the endpoint is discovered in one site.
- D. Endpoint information is not exchanged across sites unless COOP protocol is used.
Answer: D
Explanation:
Section: ACI Anywhere
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739609.html#CiscoACIMultiSiteoverlaydataplane
NEW QUESTION 82 
Refer to the exhibit. An engineer is integrating a VMware vCenter with Cisco ACI VMM domain configuration.
ACI creates port-group names with the format of "Tenant | Application | EPG". Which configuration option is used to generate port groups with names formatted as "Tenant=Application=EPG"?
- A. enable tag collection
- B. virtual switch name
- C. delimiter
- D. security domains
Answer: B
Explanation:
Section: Integrations
NEW QUESTION 83
Drag and drop the Cisco ACI Layer 4 to Layer 7 service insertion terms on the left to the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 84
An engineer must configure VMM domain integration on a Cisco UCS B-Series server that is connected to a Cisco ACI fabric. Drag and drop the products used to create VMM domain from the bottom into the sequence in which they should be implemented at the top. Products are used more than once.
Answer:
Explanation:
NEW QUESTION 85
......
CCNP Data Center Free Certification Exam Material from Dumpexams with 135 Questions: https://passleader.dumpexams.com/300-620-vce-torrent.html