Oct-2024 EMC D-PVM-DS-23 Actual Questions and Braindumps
D-PVM-DS-23 Dumps To Pass EMC Exam in 24 Hours - Dumpexams
NEW QUESTION # 22
A storage architect is designing a PowerMax solution. The architect must customize the maximum SRDF/A cache usage.
Which system view can the architect use to meet this requirement?
- A. Data Protection
- B. System Properties
- C. System Settings
- D. Performance
Answer: C
NEW QUESTION # 23
A PowerMax parent Storage Group (SG) contains two child SGs: SG1 and SG2.
What is a valid Host I/O limit setting for this configuration?
- A. Parent SG: 500,000
SG1: NOLIMIT
SG2: 1,000,000 - B. Parent SG: 500,000
SG1: 400,000
SG2: NOLIMIT - C. Parent SG: 400,000
SG1: 500,000
SG2: NOLIMIT - D. Parent SG: 400,000
SG1: 800,000
SG2: 300,000
Answer: B
NEW QUESTION # 24
What parameters are required to calculate Virtual Provisioning Savings?
- A. Subscribed Total Capacity and Subscribed Allocated
- B. Subscribed Total Capacity and Snapshot Capacity Total
- C. Snapshot Capacity Total and Modified NonShared
- D. Subscribed Allocated and Snapshot Capacity Total
Answer: A
NEW QUESTION # 25
What is the default HTTPS port assignment for communication of VSI/IAPI requests sent to REST API of Unisphere for PowerMax?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 26
What is the default data collection interval for TTP collections?
- A. 15 minutes
- B. 10 minutes
- C. 5 minutes
- D. 30 minutes
Answer: A
NEW QUESTION # 27
An architect uses the following command to collect data from a HP-UX host when designing a solution in BCSD:
sar -d -b interval count >> hostname.sar.date.txt
What does the -b flag in the command represent?
- A. Break
- B. Binary
- C. Buffer
- D. Block
Answer: C
NEW QUESTION # 28
What is the best practice sizing guideline for front-end FA utilization on a two-engine PowerMax array?
- A. 0.5
- B. 0.8
- C. 0.7
- D. 0.6
Answer: C
NEW QUESTION # 29
A storage architect is planning a Unisphere upgrade.
Which password is required for the upgrade?
- A. lockbox
- B. sysadmin
- C. boxmgmt
- D. root
Answer: D
NEW QUESTION # 30
When adding device pairs to an SRDF/Metro configuration using the -exempt option, what prevents a device pair from being added?
- A. R1 device is the source of a TimeFinder data copy
- B. R2 device is larger than the R1 device
- C. Source group and device pair are in SRDF/Adaptive Copy mode
- D. Source group and device pair are in SRDF/S mode
Answer: B
NEW QUESTION # 31
What is the maximum number of BTP files that can be included in a project in Sizer?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 32
Which PowerMax initially ordered configuration provides the fewest available slots for front-end I/O modules per engine?
- A. PowerMax 8000 single-engine
- B. PowerMax 2000 single-engine
- C. PowerMax 8000 multi-engine
- D. PowerMax 2000 dual-engine
Answer: B
NEW QUESTION # 33
What happens when a SnapVX snapshot is relinked?
- A. Snapshot is deleted and a new point-in-time snapshot is created
- B. Target is refreshed with the original point-in-time data
- C. Snapshot cannot be relinked to the same source
- D. Source is refreshed with the original point-in-time data
Answer: B
NEW QUESTION # 34
What is the maximum number of files that can be uploaded in a single operation in Sizer?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 35
What action is required on a PowerMax thin device before it can be deleted?
- A. Remove from Storage Group
- B. Set to Not Ready
- C. Set to Write Disable
- D. Unmap from front-end ports
Answer: A
NEW QUESTION # 36
Where is the Unisphere performance database backup file stored on the Unisphere server host?
- A. \Program Files\EMC\backup
- B. \SMAS\backup\SPA
- C. \SMAS\backup\data
- D. \SYMAP\backup\SPA
Answer: B
NEW QUESTION # 37
When implementing SRDF/Metro with Array Witness, what is a requirement of the witness array?
- A. Minimum of two witness arrays
- B. Two RDF groups with source and target devices
- C. Empty RDF group from witness to source and target
- D. vApp running on a VMware ESXi server
Answer: D
NEW QUESTION # 38
SRDF/A has been enabled between two PowerMax arrays. Due to a loss of all RDF links, the SRDF/A session has been placed in a Transmit Idle state.
What happens to cycle switching and the delta sets?
- A. Cycle switching stops; Capture Delta Set count grows
- B. Cycle switching continues; Transmit Delta Set count grows
- C. Cycle switching continues; Capture Delta Set count grows
- D. Cycle switching stops; Transmit Delta Set count grows
Answer: D
NEW QUESTION # 39
Match each SnapVX term to its description.
Answer:
Explanation:
NEW QUESTION # 40
An architect is configuring BCSD to design SRDF/S between two new PowerMax arrays. The architect has completed the tasks for the local side of the solution, including RA Port Group, Replication Group, and site switch.
What is the correct order of steps the architect needs to take to complete the SRDF setup?
Answer:
Explanation:
NEW QUESTION # 41
......
Download the Latest D-PVM-DS-23 Dump - 2024 D-PVM-DS-23 Exam Question Bank: https://passleader.dumpexams.com/D-PVM-DS-23-vce-torrent.html