Verified D-PEMX-DY-23 dumps Q&As - 100% Pass from Dumpexams
Pass D-PEMX-DY-23 Exam in First Attempt Guaranteed 2024 Dumps!
NEW QUESTION # 45
A server administrator wants to configure RAID on drives that are assigned to a compute sled.
Which interface can be used to complete the task?
- A. OIDC
- B. Storage sled assignment
- C. RAID Controller settings
- D. iDRAC
Answer: D
NEW QUESTION # 46
What item is used to refer to a daisy-chained configuration of a multiple MX7000 chassis environment?
- A. Identity group
- B. Chassis group
- C. Physical group
- D. Wired group
Answer: D
NEW QUESTION # 47
Which network fabric connects directly to the chassis midplane?
- A. Fabric D
- B. Fabric C
- C. Fabric A
- D. Fabric B
Answer: B
NEW QUESTION # 48
What are the correct CLI commands to configure the management IP Address on either the MX9116n or the MX5108n switches running SmartFabric OS10?
- A. interface vlan 4020
no ip address
ip address 192.168.10.10/24
no shutdown
exit
interface mgmt 1/1/1
no shutdown
exit
management route 0.0.0.0/0 192.168.10.1 - B. interface mgmt 1/1/1
no ip address
ip address 192.168.10.10/24
no shutdown
exit
management route 0.0.0.0/0 192.168.10.1 - C. interface vlan 4020
no ip address
ip address 192.168.1.10/24
no shutdown
exit
interface mgmt 1/1/1
no ip address
ip address 192.168.1.10/24
no shutdown
exit
management route 0.0.0.0/0 192.168.1.1 - D. interface vlan 4020
no ip address
ip address 192.168.1.10/24
no shutdown
exit
management route 0.0.0.0/0 192.168.1.1
Answer: C
NEW QUESTION # 49
What automatically opens a support case with technical support and collects the PowerEdge MX system state information that is required for troubleshooting an issue, then sends it securely to Dell EMC?
- A. OpenManage Essentials
- B. SupportAssist Enterprise
- C. OpenManage Enterprise
- D. SupportAssist Collections
Answer: B
NEW QUESTION # 50
How are double-width compute sleds on the MX7000 numbered from the front?
- A. As 1, 3, 5, and 7 left to right
- B. From 1 to 8, left to right
- C. From 1 to 8, top to bottom
- D. As 1, 3, 5, and 7, top to bottom
Answer: A
NEW QUESTION # 51
What are the required components for a PowerEdge MX7000 Minimum to POST configuration?
- A. One power supply unit
One compute sled
One input output module
One management module
Two front fans and two rear fans - B. Two power supply units
One compute sled
One input output module
Two management modules
Five front fans and four rear fans - C. Two power supply units
One compute sled
One input output module
One management module
Four front and five rear fans
Answer: A
NEW QUESTION # 52
A system administrator is designing a solution for a customer who will be purchasing a large number of PowerEdge MX7000 chassis. For ease of management, they would like to have the least number of chassis management groups as possible.
What is the maximum number of MX7000 chassis that are supported in a multi-chassis management group?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 53
What is the maximum supported drive configuration on a PowerEdge MX840c compute sled?
- A. 2 x 2.5" drives and 4 x 3.5" drives
- B. 4 x 2.5" drives and 2 x 3.5" drives
- C. 6 x 3.5" drives
- D. 8 x 2.5" drives
Answer: D
NEW QUESTION # 54
What is the port configuration of an MX5108n switch?
- A. 16 x internal 25GbE ports
4 x 40GbE QSFP+ ports
2 x 100GbE QSFP28 ports
1 x 10GbE RJ45 Base-T port - B. 8 x internal 25GbE ports
2 x 40GbE QSFP+ ports
1 x 100GbE QSFP28 port
4 x 10GbE RJ45 Base-T ports - C. 16 x internal 25GbE ports
1 x 40GbE QSFP+ port
2 x 100GbE QSFP28 ports
4 x 10GbE RJ45 Base-T ports - D. 8 x internal 25GbE ports
1 x 40GbE QSFP+ port
2 x 100GbE QSFP28 ports
4 x 10GbE RJ45 Base-T ports
Answer: D
NEW QUESTION # 55
An administrator has installed the iDRAC Service Module in the OS on a compute sled, they are unable to use its features in the iDRAC web GUI.
What is the likely cause of this issue?
- A. OS and iDRAC are configured on different networks
- B. iDRAC Express license is installed
- C. OS to iDRAC pass-through feature is not enabled in the iDRAC
- D. Installed OS is not supported
Answer: C
NEW QUESTION # 56
Which section of the PowerEdge MX7000 chassis provides a structure for mounting PSUs and sleds?
- A. Main Chassis
- B. Management Module slot
- C. Rear Tub
- D. Main Distribution Board
Answer: A
NEW QUESTION # 57
The iSM is available under which license(s)?
- A. OpenManage Enterprise-Modular
- B. iDRAC Enterprise only
- C. iDRAC Express only
- D. iDRAC Express and iDRAC Enterprise
Answer: D
NEW QUESTION # 58
Why is the backup lead configuration important in an MCM Group?
- A. The configuration allows sharing of the lead chassis IOMs and Management Module databases.
- B. The backup lead chassis facilitates management of systems when the existing lead chassis fails.
- C. The backup chassis is promoted automatically if the lead chassis fails.
- D. This configuration allows configuration changes from the backup chassis.
Answer: B
NEW QUESTION # 59
A PowerEdge MX7000 administrator is tasked to perform a chassis update using a catalog.
Which source options are used to create the catalog?
- A. Newest validated stacks of chassis firmware on dell.com
Latest component firmware versions on dell.com
Network path - B. Latest component firmware versions on dell.com
Dell Update Package
Network path - C. Newest validated stacks of chassis firmware on dell.com
Latest component firmware versions on dell.com
Local Directory path - D. Newest validated stacks of chassis firmware on dell.com
Dell Update Package
Local Directory path
Answer: A
NEW QUESTION # 60
An MX7000 administrator has been tasked to create a Scalable Fabric Architecture on a 3 chassis setup using Fabric B.
Which IOM configuration is recommended?
- A. Chassis 1 - Slot B1: MX9116n; Slot B2: MX7116nChassis 2 - Slot B1: MX7116n; Slot B2: MX9116n Chassis 3 - Slot B1: MX7116n; Slot B2: MX7116n
- B. Chassis 1 - Slot B1: MX9116n; Slot B2: MX9116nChassis 2 - Slot B1: MX5108n; Slot B2: MX5108n Chassis 3 - Slot B1: MX5108n; Slot B2: MX5108n
- C. Chassis 1 - Slot B1: MX7116n; Slot B2: MX7116nChassis 2 - Slot B1: MX7116n; Slot B2: MX7116n Chassis 3 - Slot B1: MX9116n; Slot B2: MX9116n
- D. Chassis 1 - Slot B1: MX9116n; Slot B2: MX5108nChassis 2 - Slot B1: MX5108n; Slot B2: MX9116n Chassis 3 - Slot B1: MX5108n; Slot B2: MX5108n
Answer: B
NEW QUESTION # 61
A data center team is working on a solution to monitor and manage data center devices from anywhere.
Which feature can be configured to perform these tasks?
- A. OIDC
- B. OMM
- C. QAT
- D. OME-M
Answer: B
NEW QUESTION # 62
What is a function of the Fabric Resources Director (FReD)?
- A. Providing QuickSync 2 feature
- B. Hosting OME-M interface
- C. Critical temperature monitoring
- D. SAS Expander routing for Fabric C
Answer: C
NEW QUESTION # 63
......
D-PEMX-DY-23 Dumps Full Questions - Exam Study Guide: https://passleader.dumpexams.com/D-PEMX-DY-23-vce-torrent.html